Advertisement
5
Mode Select
The Mode Select is used to set the operating mode. The Mode Select Switch on the front panel can
be operated with a paper clip or similar to adjust your selected mode to control hush directly on
the device. Alternatively, you can set the mode in the hush App available at:
www.yellowtec.com/hush/downloads.
Choose between five modes to control hush: Remote, GPIs, USB-HID, USB-MIDI and MIDI-EXT.
Check the chapter "Modes" for further information.
Besides that, the mode select switch has two additional special functions:
1) Pressing and holding it when switching on puts the device into bootloader mode. This
can be used to force the update functionality in case of an error. See hush App.
2) Press for approx. 5 seconds during operation to restore the factory settings of the device.
Hardware – Front Panel
See page 10.
7
Advertisement
