Advertisement
Modes
Modes
To control hush you have a choice of five modes. They allow you to easily integrate hush into com-
pletely different environments and cover many application areas. At any time you can change the
selected mode either directly on your hush device or in the hush App.
Choose from the five Modes Remote, GPIs, USB-HID, USB-MIDI and MIDI-EXT.
hush Remote
As a standalone solution, the hush Remote provides extremely convenient control over hush. It
perfectly suits all users whose existing equipment does not support red light control. Optionally,
a wired remote control can be connected to the USB-C on the back of the hush( + ). Then this mode
has to be set and the functions of the two buttons of the remote control are:
OnAir Button
In idle mode, the button is lit white and the audio of the hush+ is muted (MUTE).
For a hush (without preamp), the microphone signal is not muted.
In the active state, the button lights red and turns the m!ka OnAir indicator RED as well.
If the mute button is also pressed while in the active state, the OnAir button will flash red.
The button is latching and each press of the button changes from silent to active state.
Press the OnAir button on your hush Remote to indicate on your m!ka Mic Arm that you are OnAir.
As soon as you do so, the LED signal of your m!ka Mic Arm will light up red without any delay. If you
are using the hush + version, this step will also activate your microphone signal. Press the OnAir
button again while the LED signal of your m!ka Mic Arm is red, to turn off the red shining OnAir
indicator. Using hush + , this also deactivates your mic signal.
Mute Button
In idle mode, the button lights up white. The button lights up yellow in active mode and the dual-
color m!ka OnAir LED indicator turns white. Only on the hush + , this mutes the audio. This button
has no effect on the mic signal on the hush (without preamp).
The mute button of the hush Remote is designed as a cough button. Since only the hush + model
with its preamp processes your audio signal, the mute function is only available with hush + . Press
and hold the mute button to mute your microphone signal. A white shining OnAir indicator on your
m!ka Mic Arm as well as a yellow Mute button and a red flashing OnAir button on the hush Remo-
te unmistakably indicate muting. Release the mute button to reactivate your microphone signal.
Doing so, the OnAir LED will light up red again and you are back OnAir.
10
Advertisement
