Advertisement
Examples of Use
Examples of Use
As versatile OnAir Controllers, hush and hush+ give you control over your OnAir signaling. To show
you common configurations, we have illustrated some application examples on the following pa-
ges.
hush in Streaming Setup
Many streamers do not use hardware that supports red light control. hush in Remote mode is the
ideal plug'n'play solution. Connect your hush Remote to your hush device using the included USB-
C cable. With the push of a button you can now activate the red light on your m!ka Mic Arm with
OnAir indicator. See page 29. To connect the audio signal of your mic to your computer, you need a
sound card. Use it, as well as your video recordings, to start a (live) stream or call via your compu-
ter. When using the hush+ version, its high-quality preamp takes care of the optimal amplification
of your mic signal. You get first-class sound for your stream.
See page 17.
PC/Mac
(e.g. Live Stream)
m!ka Mic Arm
OnAir & Mic
Sound Card
(e.g. PUC2 Line)
XLR-3
USB
XLR-5
hush Remote
hush in Audio Production Setup
hush can be excellently integrated into a PC workstation for red light control. Use the mode "USB-
MIDI" and connect hush via USB to your PC or Mac. This setup allows you to control the OnAir
indicator of your m!ka Mic Arm directly from your PC. As soon as you start a recording in your DAW
software, the OnAir indicator on your mic arm will be activated simultaneously. Besides controlling
the OnAir signal at your m!ka Mic Arm, hush optionally also allows you to control the LED signal of
Yellowtec's litt Signaling Device. For example, install litt from the outside next to your studio door to
show everyone around that you are currently OnAir and do not want to be disturbed.Find more info
about litt at
www.yellowtec.com/litt.
26
Advertisement
