Advertisement
hush App
STATUS
The STATUS tab also gives you access to a quick check if your hush is wired correctly. Therefore,
please choose the mode „USB HID/Test" on the left and have a look at the "Test" section. Select the
desired signals on the right side and compare the status displayed in the app with the current sta-
tus that your m!ka Mic Arm's OnAir indicator is currently showing. If both signals match, the wiring
is done correctly.
The status tab is divided into three parts:
Mode Select
Here the operating mode of the hush( + ) is set. These are the 5 operating modes described under
Hardware / Mode Select, which can be set both here in the software and via the Mode Select
button.
States
Here the active LED color is displayed. Red has priority over white if both colors are activated at
the same time. In addition, an active microphone mute symbol is displayed for hush +, if the mute
function is active.
Test
In the USB HID / Test mode the soft keys Red, White and (with hush + ) Mute are enabled. With the
help of the buttons, the corresponding function can be triggered for test purposes, e.g. to check the
correct cabling of the device. The buttons are latching when pressed briefly, and momentary when
pressed for longer.
16
Advertisement
