Advertisement
In the hush App, the setting to select the OnAir indicator dual-color or single-color should be made
to guarantee for best usability.
The 5pin XLR female connector has the following pinout:
1: Audio GND
2: Audio hot
3: Audio cold
4: m!ka LED
5: m!ka LED
Shield: Chassis
RED
4 (Yellow cable) = +12..24VDC
5 (Black cable)= GND
WHITE
4 (Yellow cable) = GND
5 (Black cable)= +12..24VDC
Find futher details in the m!ka Briefing Book available at
2
3-pin XLR male
The 5pin XLR female connector has the following pinout:
1: Audio GND
2: Audio hot
3: Audio cold
With hush, the unchanged audio signal with microphone level is present here.
With hush + , on the other hand, a pre-amplified line signal is available here, which can also be mu-
ted (MUTE function). With hush + , the preamplification of +12..75dB, 48V phantom power and the
high-pass filter can be set via the hush App.
4
USB-C
The device is supplied with power via the USB-C port. The power can be supplied via a PC or MAC,
e.g. to configure the device or to use it via USB-MIDI or USB-HID. For applications where no PC or
MAC is needed, e.g. the use as a stand alone solution with remote control or control via GPIs or
MIDI-EXT, a USB power supply is sufficient.
It is important to ensure a sufficient voltage and current supply. If the USB port does not provide
enough power, an externally powered USB hub can do the job. hush and hush + are designed for 5V,
450mA.
See page 23.
Hardware – Front Panel
5
4
3
2
1
www.yellowtec.com/mika/downloads.
2
3
1
6
Advertisement
