Yellowtec hush Operation Manual page 12

Modes
MIDI-EXT
Connect MIDI hardware to control your hush via external MIDI. The hush App offers extensive
possibilities to configure your MIDI setup.
External MIDI controllers or keyboards can be connected via the 5-pin MIDI socket on the rear of the
hush(+). To be able to use these to control the functions RED / WHITE / MUTE, this mode must be
set.
In the factory setting the MIDI preset MIDI notes is preset: C3 = WHITE, D3 = RED, E3 = MUTE , MIDI
channel 1, NOTE ON/OFF, no velocity. If a different or own preset is needed, this can be set via hush
App. More about this in the description of the hush App. See page 18.
12