Installing The Bypass Transport - Xerox DocuPrint 4890 Manual

Bypass transport

Installing the bypass transport

7-3
6. Place the transport in its storage location.
7. Press downward on the scuffer arm in stacker tray 1 until it
rests in the tray.
NOTE: The bypass transport support remains in place. It is
permanently attached to your printer.
8. Power on the printer.
Follow these steps to install the bypass transport:
1. Power off the printer.
2. Raise the scuffer arm in stacker tray 1 to its highest position.
(A spring holds the scuffer arm in the raised position.)
Guide to Performing Routine Maintenance