Ford F-150 LIGHTNING Owner's Manual page 442

Hide thumbs Also See for F-150 LIGHTNING:
Table of Contents

Advertisement

Note: If prediluted coolant is not available,
use the approved concentrated coolant
diluting it to 50/50 with distilled water. See
Cooling System Capacity and
Specification (page 480). Using water that
has not been deionized could contribute to
deposit formation, corrosion and plugging
of the small cooling system passageways.
Note: Coolants marketed for all makes and
models might not meet our specifications
and could cause damage to the cooling
system. Resulting component damage
could void the vehicle warranty.
If the coolant level is at or below the
minimum mark, add prediluted coolant
immediately.
To top up the coolant level do the
following:
1.
Unscrew the cap slowly. Any pressure
escapes as you unscrew the cap.
2. Add prediluted coolant approved to
the correct specification. See Cooling
System Capacity and Specification
(page 480).
3. Add enough prediluted coolant to
reach the correct level.
4. Replace the coolant reservoir cap. Turn
the cap clockwise until it contacts the
hard stop.
5. Check the coolant level in the coolant
reservoir the next few times you drive
your vehicle. If necessary, add enough
prediluted coolant to bring the coolant
level to the correct level.
If you have to add more than 1.1 qt (1 L) of
coolant per month, have your vehicle
checked as soon as possible. Operating
your vehicle with a low level of coolant can
result in overheating and possible electric
motor damage.
F-150 Lightning (TFD) Electric, Canada/United States of America, enUSA, Edition date: 202112, First-Printing
Maintenance
In case of emergency, you can add a large
amount of water without coolant in order
to reach a vehicle service location. In this
instance, have qualified personnel do the
following as soon as possible:
1.
Drain the cooling system.
2. Chemically clean the coolant system.
3. Refill with coolant.
Water alone, without coolant, can cause
damage from corrosion, overheating or
freezing.
Do not use the following as a coolant
substitute:
Alcohol.
Methanol.
Brine.
Any coolant mixed with alcohol or
methanol antifreeze.
Alcohol and other liquids can cause
damage from overheating or freezing.
Do not add extra inhibitors or additives to
the coolant. These can be harmful and
compromise the corrosion protection of
the coolant.
Recycled Coolant
We do not recommend the use of recycled
coolant, as an approved recycling process
is not yet available.
Dispose of used coolant in an appropriate
manner. Follow your community's
regulations and standards for recycling and
disposing of automotive fluids.
438

Advertisement

Table of Contents
loading

Table of Contents