Ford F-150 LIGHTNING Owner's Manual page 281

Adaptive Cruise Control
Manually Changing the Set Speed
Press the SET+ button to
increase the set speed in small
increments. Press and hold the
SET+ button to increase the set speed in
large increments. Release the button when
the indicated set speed reaches the
preferred speed.
Press the SET- button to
decrease the set speed in small
increments. Press and hold the
SET- button to decrease the set speed in
large increments. Release the button when
the indicated set speed reaches the
preferred speed.
You can also press the accelerator or brake
pedal until you reach the speed you prefer.
Press the SET+ or SET- button to select
the current speed as the set speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed continuously displays in the
instrument cluster display when the
system is active.
SETTING THE ADAPTIVE
CRUISE CONTROL GAP
Press the button to cycle
through the four gap settings.
F-150 Lightning (TFD) Electric, Canada/United States of America, enUSA, Edition date: 202112, First-Printing
(If Equipped)
E337576
The selected gap appears in the
information display as shown by the bars
in the image.
Note: The gap setting is time dependent
and therefore, the distance adjusts with your
vehicle speed.
Note: It is your responsibility to select a gap
appropriate to the driving conditions.
Adaptive Cruise Control Gap Settings
Graphic Gap Distance
Display,
Bars Indic-
ated
Between
Vehicles
1
2
3
4
Each time you switch the system on, it
selects the last chosen gap setting.
277
Dynamic
Behavior
Closest. Sport.
Close. Normal.
Medium. Normal.
Far. Comfort.