Efforts Exerted On The Part - Technifor XF510Cr Operating And Maintenance Manual

Approximative forces exerted on the part to mark
Fx = Fy (daN)
Fz (daN)

Efforts exerted on the part

The axial effort of the stylus on the part depends on the stylus type and on the operating pressure.
Stylus to be used
NA0
NA1 - NA1 LG 100
N2 - NA2
The lateral efforts transmitted via the stylus on the part to mark depend on the material.
For typical steels, lateral effort in X-Y is equal to the axial effort.
These values are used to dimension the clamping of the part in relation with the desired safety coefficient.
Poor clamping may allow the part to move and the stylus point to break.
Ref. DCD01/3074 - XF510Cr-Sr-Dr_en_C
Installation
A
Stylus
NA0 NA1
± 8.0 ± 18.8
-8.0 -18.8
Pressure (Bar)
1 2 3
Force (daN)
1.3 2.7 4.0
3.1 6.3 9.4
6.2 12.3 18.5
NA1 LG 100 N2
± 18.8 ± 36.9
-18.8 -36.9
4 5 6
5.3 6.6 8.0
12.6 15.7 18.8
24.6 30.8
NA2
± 36.9
-36.9
7 8
9.3 10.6
22.0
20/31
C