Possible Integration And Operating Positions For The Xf510Cr/Sr/Dr - Technifor XF510Cr Operating And Maintenance Manual

Possible integration and operating positions for the XF510Cr/Sr/Dr

Stylus vertical pointing down
Horizontal stylus
0
X
Position 1
Top view
Horizontal stylus
X
Y
Position 3
Top view
Note
If the stylus falls below the sensors when power
is turned off in the 1 or 3 position, the origin will
be reset at the first marking, and there will be no
problem with a shifting of the origin.
Ref. DCD01/3074 - XF510Cr-Sr-Dr_en_C
Installation
A
Y
0
Stylus vertical pointing up
Position impossible
Risk of particles penetrating inside the head.
Choose a version with protective boot.
Horizontal stylus
Y
X
0
Position 2
Top view
Horizontal stylus
X
Y
0
Position 4
Top view
If the stylus falls below the sensors when power
is turned off in the 2 or 4 position, the origin will
be reset at the first marking, and there will be no
problem with a shifting of the origin.
C
21/31