Next steps
1. Install the
palmrest
bracket.
2. Install the
ssd
bracket.
3. Install the ssd.
4. Install the battery.
5. Install the
base
cover.
6. Install the
microSD
card.
7. Follow the procedure in
after working inside your
Touchpad buttons
Removing the touchpad buttons board
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the
ssd
bracket.
7. Remove the
palmrest
bracket.
Steps
1. Disconnect the smart card reader cable and unroute the cable [1,2].
This manual downloaded from http://www.manualowl.com
computer.
Disassembly and reassembly
61