Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
microSD
card.
4. Follow the procedure in
after working inside your
LED board
Removing the LED board
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the
ssd
bracket.
7. Remove the
palmrest
bracket.
Steps
1. Unlock and disconnect the USH cable from the pamlrest [1,2].
56
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
computer.