Touchpad Button; Removing The Touchpad Buttons - Dell P44E Service Manual
Hide thumbs
Also See for P44E:
- Service manual (103 pages) ,
- Setup and specifications manual (44 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
Steps
1. Align and place the smart-card reader into its slot on the computer.
2. Replace the two (M2x2.5) screws to secure the smart-card reader in place.
3. Adhere the smart-card reader cable to the touchpad.
4. Connect the smart-card reader cable to the connector on the USH daughter board.
5. Connect the touchpad button cable to the connector on the touchpad.
Next steps
1. Install the
WLAN
card.
2. Install the
WWAN
card.
3. Install the
primary M.2
4. Install the
inner
frame.
5. Install the battery.
6. Install the
base
cover.
7. Install the
SD
card.
8. Follow the procedure in
Touchpad button
Removing the Touchpad buttons
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
primary M.2
6. Remove the
WLAN
card.
7. Remove the
WWAN
card.
8. Remove the
inner
frame.
SSD.
after working inside your
before working inside your
SSD.
computer.
computer.
Disassembly and reassembly
61
Advertisement
Table of Contents
