7. Remove the
palmrest
bracket.
8. Remove the
LED
board.
9. Remove the speaker.
10. Remove the heatsink.
11. Remove the
memory
module.
12. Remove the
DC-in
.
13. Remove the
WLAN
card.
14. Remove the
system
board.
15. Remove the
coin cell
battery.
16. Remove the keyboard.
17. Remove the
SmartCard reader
Steps
1. Remove the eleven (M2x2) screws that secure the keyboard to the keyboard bracket [1].
2. Remove the keyboard from the keyboard bracket [2].
Installing the keyboard bracket
Steps
1. Align and place the keyboard on the keyboard bracket [1].
2. Replace the 12 (M2x2) screws to secure the keyboard on the keyboard bracket [2].
This manual downloaded from http://www.manualowl.com
board.
Disassembly and reassembly
83