Next steps
1. Replace the
inner
frame.
2. Replace the
WLAN
card.
3. Replace the battery.
4. Replace the
base
cover.
5. Replace the
microSD
card.
6. Follow the procedure in
Touchpad buttons
Removing the touchpad button board
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the speaker.
Steps
1. Open the latch and disconnect the smartcard reader Flexible Flat Cable (FFC) from the USH board [1].
2. Peel the smartcard reader FFC of the palmrest [2] and disconnect the touchpad button board cable from the connector on the
touchpad [3].
after working inside your
computer.
before working inside your
computer.
Disassembly and reassembly
51