Next steps
1. Install the ssd.
2. Install the battery.
3. Install the
base
cover.
4. Install the
microSD
card.
5. Follow the procedure in
after working inside your
Palmrest bracket
Removing the palmrest bracket
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the ssd.
6. Remove the
ssd
bracket.
Steps
1. Un-route the wireless antenna [1] and then disconnect and un-route the speaker cable from the system board [2].
36
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
computer.