3. Reseat the LED board [1].
4. Replace the one (M2x2.5) to secure the LED board to the computer [2].
Next steps
1. Install the
palmrest
bracket.
2. Install the
ssd
bracket.
3. Install the ssd.
4. Install the battery.
5. Install the
base
cover.
6. Install the
microSD
card.
7. Follow the procedure in
after working inside your
Heat sink
Removing the Heatsink
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
microSD
card.
3. Remove the
base
cover.
4. Remove the battery.
Steps
1. Disconnect the Heatsink fan cable from the connector on the system board [1].
44
Disassembly and reassembly
This manual downloaded from http://www.manualowl.com
computer.