Solid-State Drive; Removing The Solid-State Drive 1 - Dell XPS 15 9510 Service Manual

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly at an angle, into the memory-module slot.
3. Press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
NOTE: Repeat step 1 to step 3 to install the other memory module if available on your computer.
Next steps
1. Install the base cover.
2. Follow the procedure in

Solid-state drive

Removing the solid-state drive 1

Prerequisites
1. Follow the procedure in
CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Remove the base cover.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
20 Removing and installing components
After working inside your
Before working inside your
computer.
computer.