Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell XPS 15 9510 Service Manual
Hide thumbs
Also See for XPS 15 9510:
- Setup and specifications (23 pages) ,
- Connection manual (12 pages)
Table of Contents
Advertisement
10. Connect the keyboard cable to the system board and close the latch to secure the cable.
11. Connect the antenna cables to the wireless card.
12. Align the screw hole on the wireless-card bracket with the screw hole on the system board.
13. Replace the screw (M1.6x3) that secures the wireless-card bracket to the system board.
14. Connect the touch screen cable and camera cable to the display-assembly cable .
15. Replace the two screws (M1.6x3) that secure the display-assembly cable holder to the palm-rest and keyboard assembly.
16. Connect the touch screen cable and camera cable to the display-assembly cable.
17. Align the screw holes on the display-assembly cable bracket with the screw holes on the system board.
18. Tighten the three captive screws that secure the display-assembly cable bracket to the system board.
Next steps
1. Install the
I/O
board.
2. Install the
right
fan.
3. Install the
left
fan.
4. Install the
heat
sink.
5. Install the
solid state drive
6. Install the
solid state drive
7. Install the memory.
8. Install the battery.
9. Install the speakers.
10. Install the
base
cover.
11. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the speakers.
5. Remove the memory.
6. Remove the
solid state
7. Remove the
solid state
8. Remove the
heat
sink.
NOTE:
The system board can be removed or installed together with the heat sink attached. This simplifies the
procedure and avoids breaking the thermal bond between the system board and the heat sink.
9. Remove the
right
fan.
10. Remove the
left
fan.
11. Remove the
audio daughter
12. Remove the
display
assembly.
13. Remove the
system
board.
About this task
After performing all the pre-requisites, you are left with the palm-rest and keyboard assembly.
46
Removing and installing components
2.
1.
After working inside your
Before working inside your
drive1.
drive2.
board.
computer.
computer.
Advertisement
Table of Contents
