Registration; To Register A Handset - Motorola O202 Manual

10. Registration

Up to 11 handsets can be registered to one base station. Additional handsets must be
registered to the base before you can use them.
• The instructions described below apply specifically to the handset of this model If you
wish to register another manufacturer's handset, the instructions may vary. In this case,
please refer to the instruction manual of the additional handset.
• The System PIN is required to register or de-register handsets. The default PIN is 0000.
10.1

To register a handset

On the base:
p
1. Press and hold
registration mode for 90 seconds.
On the handset:
1. If the handset is new, the display shows
2. Display shows Press and Hold Base Find
3. Press OK, display shows
handset will automatically register, if the PIN has been changed enter the system PIN
and press OK.
4. When registration is complete, the display shows
Or
If the handset has already been registered to another base, the standby display is
shown. Press Menu, scroll
5. Register HS is highlighted. Press Select.
6. Bases are displayed. If necessary, scroll
O2 handset to and press Select.
7. If you are replacing a base that is already indicating
display shows Replace Base X?
8. The display shows
automatically register, if the PIN has been changed, enter the system PIN and press
OK.
NOTE
If registration is not successful the first time, please repeat the process again in case the
base registration period ran out of time.
If there are already 11 handsets registered to the base, registration will fail. You must de-
register a handset before you can register a new one.
Registration
until the base emits a double beep. The base will remain in
Key.
Searching Base
D
to Registration
Press Yes.
Searching Base X. If the system PIN is 0000 (default) the handset will
Please register. Press Reg.
X. If the system PIN is 0000 (default) the
Handset Registered.
and press Select.
U D
or to a new base you wish to register the
In Use, when you press Select the
39