Home Decorators Collection ALISIO Use And Care Manual page 17

Assembly — Installing the Light Kit (continued)
12
Installing the glass shade
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Position the notches (XX) in the outer rim of the glass
shade (L) so they line up with the tabs (WW) on the
inside of the rim on the 20W LED light kit (K).
Carefully lift the glass (L) up inside the 20W LED light
kit (K) and secure it to the fan by turning the glass
shade (L) clockwise until snug. DO NOT
OVERTIGHTEN.
WW
XX
17
Please contact 1-800-986-3460 for further assistance.
G
K
L
HOMEDEPOT.COM/HOMEDECORATORS