Basic Connections - JVC GR-AX480 Instructions Manual

36
EN
When connecting
the cables, open
the jack cover.
Audio and
Video cables
(provided)
If your TV/VCR
has the SCART
connector, use
the cable adapter.
(GR-AX480 only)
VCR
Antenna
RF unit
RF-V5E
(optional)
NOTES:
● It is recommended to use the AC Power
Adapter/Charger as the power supply instead
of the battery pack.
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder's Power Switch to "CAMERA",
then set your TV to the appropriate input
mode.
● If you have a TV or speakers that are not
specially shielded, do not place the speakers
adjacent to the TV as interference will occur
in the camcorder playback picture.
Downloaded from:
To AUDIO and
VIDEO OUT
connectors
To
AUDIO and
VIDEO IN
connectors
To AUDIO, VIDEO and
RF DC OUT connectors
https://www.usersmanualguide.com/
PLAYBACK
There are three basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR
(Editing, Dubbing and Playback)
NOTE:
Use the provided Audio and Video cables.
CONNECT CAMCORDER TO VCR
1
As shown in the illustration to the left, connect the
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the VCR.
SUPPLY POWER
2
Turn on the camcorder, the VCR and the TV.
SELECT MODE
3
Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.
Connection To A TV With A/V Input
Connectors (Playback ONLY)
B
NOTE:
Use the provided Audio and Video cables.
CONNECT CAMCORDER TO TV
1
As shown in the illustration to the left, connect the
Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the TV.
SELECT MODE
2
Set the TV to its VIDEO or AV mode (as specified in
its instructions).
Connection To A TV With NO A/V Input
Connectors (Playback ONLY)
NOTE:
Use the optional RF-V5E RF unit.
*Refer to the RF-V5E instruction manual for connection
procedure.

Basic Connections

A