PLAYBACK
When
connecting the
cables, open
the jack cover.
A
If your TV/VCR
has the SCART
connector, use
the provided
cable adapter.
VCR
Downloaded from:
Basic Connections
To AUDIO and
VIDEO connectors
Audio and Video
cables (provided)
To AUDIO and
VIDEO IN
connectors
https://www.usersmanualguide.com/
There are two basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR [A]
(Editing, Dubbing and Playback)
NOTE:
Use the provided Audio and Video cables.
CONNECT CAMCORDER TO VCR
1
As shown in the illustration at left, connect the
Audio and Video cables between the AUDIO and
VIDEO connectors on the camcorder and those on
the VCR.
SUPPLY POWER
2
Turn on the camcorder, the VCR and the TV.
SELECT MODE
B
3
Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.
Connection To A TV With A/V Input
Connectors [B] (Playback ONLY)
NOTE:
Use the provided Audio and Video cables.
CONNECT CAMCORDER TO TV
1
As shown in the illustration at left, connect the
Audio and Video cables between the AUDIO and
VIDEO connectors on the camcorder and those on
the TV.
SELECT MODE
2
Set the TV to its VIDEO or AV mode (as specified in
its instructions).
NOTES:
● It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack.
● To monitor the picture and sound from the camcorder
without inserting a tape, set the camcorder's Power
switch to "CAMERA", then set your TV to the appropri-
ate input mode.
● If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV
as interference will occur in the camcorder playback
picture.
27
EN