Tape Length Setting - JVC GR-AX480 Instructions Manual

8
EN
Select Dial
Viewfinder
SP
MENU
MENU END
4
FOCUS
EXPOSURE
DATE TIME
TELE MACRO
TAPE LENGTH
M. W. B.
ZOOM SPEED
NEXT
4
TAPE LENGTH
T30
T45
T60
EXIT
MENU
MENU END
4
FOCUS
EXPOSURE
DATE TIME
TELE MACRO
TAPE LENGTH
M. W. B.
ZOOM SPEED
NEXT
4
Downloaded from:
MENU Jog Dial
T60
Tape length
indicator
Menu Screen
AUTO
AUTO
25. 12. 98
OFF
T60
AUTO
FAST
TAPE LENGTH
Setting Menu
AUTO
AUTO
25. 12. 98
OFF
T30
AUTO
FAST
https://www.usersmanualguide.com/
GETTING STARTED

Tape Length Setting

Set the tape length according to the length of the tape
used.
ACCESS MENU SCREEN
1
First set the Power Switch to "CAMERA". Turn the
Select Dial to any position except AUTO LOCK,
then press the MENU Jog Dial.
SELECT FUNCTION
2
Rotate the MENU Jog Dial to move the highlight bar
to "TAPE LENGTH", then press it. The TAPE
LENGTH Setting Menu appears.
SET TAPE LENGTH
3
Rotate the MENU Jog Dial to move the highlight bar
to the correct setting. T30=30 minutes of recording
time, T45=45 minutes, and T60=60 minutes.
•If you decide you want to return the tape length to
the previous setting, rotate the MENU Jog Dial to
move the highlight bar to "EXIT".
CLOSE MENU
4
Press the MENU Jog Dial. The Menu Screen
reappears and the highlight bar is on "MENU END".
Then press the MENU Jog Dial again to close the
Menu Screen.
NOTES:
● The tape remaining time (
viewfinder is correct only if the correct tape length has
been selected.
● Once you have set the tape length, it remains un-
changed even if the Select Dial is returned to AUTO
LOCK.
(cont.)
pg. 13) displayed in the