JVC GR-AX480 Instructions Manual page 23

Select Dial
Viewfinder
MENU
MENU END
4
FOCUS
EXPOSURE
DATE TIME
TELE MACRO
TAPE LENGTH
M. W. B.
ZOOM SPEED
NEXT
4
Menu Screen 1
MENU
BACK
4
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
MENU END
4
Menu Screen 2
REC TIME
OFF
1 4 S
1 2 S
1 S
5 S
EXIT
Setting Menu
(ex. REC TIME)
MENU
BACK
4
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
MENU END
4
Normal Screen
Downloaded from:
MENU Jog Dial
AUTO
AUTO
25. 12. 98
OFF
T30
AUTO
FAST
OFF
OFF
ON
GR-AX480 only
07
OFF
1S
OFF
GR-AX480 only
ON
07
OFF
https://www.usersmanualguide.com/
Using Menu For Detailed Adjustment
This camcorder is equipped with an easy-to-use,
on-screen menu system that simplifies many of the more
detailed camcorder settings.
ACCESS MENU SCREEN
1
Turn the Select Dial to any position except AUTO
LOCK, then press the MENU Jog Dial. The Menu Screen
appears.
SELECT FUNCTION
2
Rotate the MENU Jog Dial to place the highlight bar on
the desired function.
• When the highlight bar reaches the bottom of Menu
Screen 1, Menu Screen 2 is automatically displayed.
When the highlight bar reaches the top of Menu
Screen 2, Menu Screen 1 is automatically displayed.
• If the setting you want can't be found in the Menu
Screen, place the highlight bar on "MENU END", then
go to step 5.
MAKE SETTING
3
Press the MENU Jog Dial. The setting menu of the
selected function appears. The setting procedure
depends on the function you select.
If you select "FOCUS", "EXPOSURE",
"DATE/TIME", or "CHARACTER" . . .
..... see respective pages (FOCUS:
EXPOSURE:
CHARACTER:
If you select "JLIP ID NO." . . .
..... press the MENU Jog Dial so that the number blinks,
then rotate it until the desired number appears, and
press it. Then rotate the MENU Jog Dial to move
the highlight bar to "EXIT".
If you select any other functions . . .
..... rotate the MENU Jog Dial to move the highlight bar
to the desired setting.
• If you decide you want to return to the previous
setting, rotate the MENU Jog Dial to move the
highlight bar to "EXIT".
END SETTING
4
Press the MENU Jog Dial. The Menu Screen reappears
and the highlight bar is on "MENU END".
CLOSE MENU
5
Press the MENU Jog Dial. The normal screen reappears.
NOTES:
● The menu function except "FOCUS" and "EXPOSURE" are
not available while in the Record mode.
● For GR-AX380/AX280: The tally lamp is not built-in.
"TALLY LAMP" in the Menu Screen is always set to "OFF"
and cannot be set to "ON".
EN
pg. 26, 27,
pg. 28, DATE/TIME: pg. 7,
pg. 22).
23