JVC GR-AX480 Instructions Manual page 25

REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
= Factory setting and when the Select Dial is set to AUTO LOCK
Downloaded from:
This feature allows you to set the parameters for Animation and Time-Lapse
recording ( pg. 31).
This feature allows you to set the parameters for Self-Timer (
Lapse recording (
ON
OFF
Allows you to enter an original title of up to 18 characters (
This number is necessary when connecting the camcorder to a device such as a
computer using the J terminal (JLIP). The numbers range from 01 to 99. Factory
setting is 07.
OFF
ON
https://www.usersmanualguide.com/
pg. 31).
The tally lamp comes on to signal the start of recording.
(available only for GR-AX480)
The tally lamp remains off at all times.
(GR-AX380/AX280: always set to this mode.)
Automatic demonstration will not take place.
Demonstrates certain functions such as the Fader, Instant Titles
etc. When "DEMO MODE" is set to "ON" and the Menu Screen
is closed, demonstration starts.
NOTES:
● When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
● By turning off the camcorder or inserting a tape whose Erase
Protection tab is in the position that allows recording into it,
"DEMO MODE" is set to "OFF" automatically.
● During demonstration, all functions except zoom are disabled.
25
EN
pg. 30) and Time-
pg. 22).