Accessories; Casing Dimensions - Benchmark RD 532 combi Installation And Servicing

1.4

Accessories

• Standard horizontal flue kit at 100 mm outside
diameter for flues up to 4 m in length.
• Flue duct kits for horizontal (125 mm outside
diameter) for flue lengths up to 13 m and vertical flue
systems for flue lengths up to 13.7 m. Fitting instruc-
tions are sent with these kits.
• Heating programmers
• Single or Twin channel digital timer
• Single channel mechanical timer
• RF controlled Digistat
1.5

Casing dimensions

min
10*
101
103
440
Fig. 1
13 Manifold assembly
Outer case
101
103 Facia cover
X Standard Concentric Horizontal Flue System: min. 160 mm
Alternative Concentric Flue System: min. 220 mm
Y Standard Concentric Horizontal Flue System: 40mm
Alternative Concentric Flue System: 70 mm
Z Standard Concentric Horizontal Flue System: 105 mm
Alternative Concentric Flue System: 130 mm
*
For servicing the appliance
Note: Horizontal flue only: dimension X may need to increase due
to the incline of the flue.
6 720 611 451 GB (03.11)
min
Z
10*
Y
120
35
360
395
• Night Set Back module
• TR2 room controllers.
NOTE: Where a timer, other than the Twin Channel Dig-
ital, is used, the Hot Water Pre-Heat facility can only be
isolated with the ECO button on the fascia.
*
600
X
*
Details of the appliance
13
200
6 720 610 601- 01.4O
5