Table of Contents
Advertisement
Mode Controls (Flame, Blower, Light, Comfort Control, EmberBed Light)
Use the mode button to cycle through the rive mode controls (see Figure 9 below).
Look here for
mode controls.
Flame Height
Flame height may be controlled using the UP and DOWN buttons when in Flame Height Mode (see
Figure 10 below). The center display will display the 7 settings, from "OFF" to "HI" for full on.
NOTE: Flame height may not be adjusted if operating in Smart Thermostat setting.
When in flame height
mode, this icon will
appear darkened.
Blower Speed
The blower may be controlled using the up and down buttons when in Blower Speed Mode (see Figure
11). The center display will display the 7 settings, from "OFF" to "HI" for full on.
When in blower
mode, this icon will
appear darkened.
MANUAL MODE – BLOWER OPERATION
When in Manual Mode the blower will remain on, even if the burner is turned off and the heater cools.
Either manually turn the blower off, or turn off the heater by pressing the On/Off button.
© Travis Industries
Operation
Press the mode button to cycle through the mode settings.
F
OFF
F
This is the flame height
OFF
read-out. Use the up or
down buttons to adjust
the flame height (7
settings).
MAX
F
This is the blower
OFF
speed read-out. Use
the up or down buttons
to adjust the blower
speed (7 settings).
MAX
8/7/2019 - 1485
Flame
Height
Optional
AUX
Blower
Accent
Comfort
Light
Control
Figure 9
High
Medium
Off
Figure 10
High
Medium
Off
Figure 11
864 GSR2 Owners
13
Advertisement
Table of Contents
