Table of Contents
Advertisement
8
Location of Controls
Most features will be controlled by the
included remote.
Direct Operation
The fireplace may be directly operated from the battery holder. The three positions are shown below:
ON – Burner turns on (regardless of transmitter settings).
OFF – Burner turns off (regardless of transmitter settings).
REMOTE – Burner is controlled by the transmitter.
NOTE: When the battery holder switch is turned to ON or OFF, the mode settings (Flame Height, Comfort
Control) will remain in the same state as before the switch was moved (i.e.: the IFC "remembers" the last
setting). If you wish to adjust the mode settings use the transmitter mode button to adjust the settings
(see "Mode Controls" on page 13). The thermostat and burner on/off operating functions will not work on
the transmitter.
© Travis Industries
Operation
Some fireplaces
use a removable
cover. Remove it
to access the
controls.
The battery holder / switch is on the
right side, below the firebox.
8/7/2019 - 1485
Some fireplaces use an
access door (grill) and
concealment cover. Open
them to expose the
controls.
An instruction card for
operating the fireplace is
attached to the inside of
the fireplace here.
Replace it for easy
reference.
Use the rheostat on the fireplace to
control the EmberBed brightness.
864 GSR2 Owners
Advertisement
Table of Contents
