Installing Memory Module; Heat Sink; Removing Heat Sink - Dell OptiPlex 3050 Micro Owner's Manual

a. Pull the securing clips from the memory module until the memory module pops up [1].
b. Remove the memory module from the socket on the system board [2].

Installing memory module

Steps
1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module socket and press it until it clicks into place.
3. Install the:
a. system fan
b. cover
4. Follow the procedure in

Heat sink

Removing heat sink

Steps
1. Follow the procedure in
2. Remove the:
a. cover
b. 2.5–inch drive assembly
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 21