Installing Coin Cell Battery; Storage; Removing 2.5-Inch Drive Assembly - Dell OptiPlex 3050 Micro Owner's Manual

Installing coin cell battery

Steps
1. Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
3. Install the cover.
4. Follow the procedure in

Storage

Removing 2.5–inch drive assembly
Steps
1. Follow the procedure in
2. Remove the cover.
3. To remove the drive assembly:
a. Press the blue tabs on both sides of the drive assembly [1].
b. Push the drive assembly to release it from the computer [2].
c. Remove the drive assembly from the computer [3].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 13