Page 2
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com...
Toll-Free: 800-775-0703 or customerservice@kraususa.com While these step-by-step instructions are intended to assist in the safe installation of a Kraus sink, this product is likely to perform best when installed by a licensed professional. The failure to follow these instructions or to hire a professional when needed may result in personal injury or property damage and may void the warranty.
Parts List KWU111-17 KWU110-28 Cut-Out Template · Cut-Out Template · Mounting Hardware · Mounting Hardware · · Bottom Grid KBG-UN1-28 · Bottom Grid KBG-WSU1-17 Strainer ST-1 · Strainer ST-1 · · Drain Cap STC-2 · Drain Cap STC-2 Rolling Mat KRM-11BL ·...
Page 6
Parts List KWU110-36 · Cut-Out Template · Mounting Hardware · Bottom Grid KBG-UN1-36 Strainer ST-1 · · Drain Cap STC-2 · Rolling Mat KRM-11BL · Cutting Board KCB-WS103SA KWU120-45 · Cut-Out Template Mounting Hardware · Bottom Grid KBG-UN1-23 · · Bottom Grid KBG-WSU1-45 ·...
Page 7
Dimensions 17" (431.8mm) 21" (533.4mm) 15" (381mm) 19" (482.6mm) 3 1/2" (90mm) 3 1/2" (90mm) R 0" R 0" (0mm) (0mm) typ. typ. R 1/4" (5mm) R 1/4" (5mm) Model #: KWU111-17 Model #: KWU111-21 Sink Dimensions: 17” x 19” x 10” Sink Dimensions: 21”...
Page 8
Dimensions 28" (711.2mm) 30" (762mm) 26" (660.4mm) 28" (711.2mm) 5" (127mm) 3 1/2" (90mm) 3 1/2" (90mm) R 0" 13 7/8" 13 7/8" R 0" (0mm) (353.6mm) (353.6mm) (0mm) typ. typ. 4" 101.6mm) R 1/4" R 1/4" (5mm) (5mm) Model #: KWU110-28 Model #: KWU112-30 Sink Dimensions: 28”...
Page 9
Dimensions 36" (914.4mm) 34" (863.6mm) 3 1/2" (90mm) R 0" (0mm) typ. Model #: KWU110-36 Sink Dimensions: 36” x 19” x 10” Min Cabinet Size: 39” 45" (1143mm) 43" (1092.2mm) 5" (127mm) 3 1/2" (90mm) R 0" (0mm) typ. R 1/4" (5mm) Model #: KWU120-45 Sink Dimensions: 45”...
Page 10
Step 1. Determine Reveal Type · Use scissors to cut along the line of the paper template for your desired reveal type (Positive or Flushed Reveal) KRAUS Recommended Installation Type 3/8” Positive Reveal Flushed/Zero Reveal 3/8” POSITIVE FLUSHED/ZERO Centerline...
Page 11
Step 2. Position Template Check the cut-out template against the actual sink to ensure a proper sized cut-out. · · Place the cut-out template in the desired location on the countertop. NOTE: Make sure clearance is suitable for backsplash, faucet and plumbing for the sink.
Page 12
Step 3. Trace Template Trace template on countertop with a pencil. ·...
Page 13
Step 4. Cut Countertop · Cut the opening in the countertop by carefully following the traced line. ! CAUTION - To avoid the risk of personal injury, wear safety glasses and cut resistant gloves with non-slip grip when cutting. NOTE: Please use the appropriate saw that best fits your countertop material.
Page 14
Step 5. Set up Mounting Brackets • Turn countertop over and align sink with countertop. Decide location for mounting brackets. • Mounting holes should be 1/2" from edge of sink. 1/2" (13mm) Step 6. Drill Hole in Countertop • Drill 3/8" diameter x 1/2" deep hole in the countertop. ! CAUTION - To avoid the risk of personal injury, wear safety glasses and cut resistant gloves with non-slip grip when drilling.
Page 15
Step 7. Install Anchors • Insert anchors into drilled holes and lightly tap with a hammer until flush. Step 8. Secure Sink to Countertop · Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
Step 9. Attach Mounting Hardware • Attach mounting hardware to secure bowl. Remove excess sealant from inside lip. • Allow sealant to set for 30 - 60 minutes. NOTE: Use acetone or rubbing alcohol to remove any excess sealant. Step 10. Install Plumbing Fixtures ·...
Page 17
Kraus warrants the structure and finish of the Kitchen Sink to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the sink was Kitchen Sink was first installed.
Page 18
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
Page 19
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.com...