Using The Hand Vacuum; Charging Base With Tool Storage; Emptying The Dirt Tank - Bissell POWERSWIFT ION XRT 3192 Series Quick Start Manual

Using the Hand Vacuum

1. 2.
Press the button on top of Press the Power Button to
the Hand Vacuum handle and begin cleaning.
lightly pull to remove it from
the machine.

Charging Base with Tool Storage

Emptying the Dirt Tank

1. 2.
Make sure the Hold the hand
vacuum is OFF. vacuum vertically
Remove the hand and press the release
vacuum by pressing button on the front to
the release button on release the Dirt Tank.
its top handle.
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
4 BISSELL.ca
3.
Insert the desired tool firmly
into the hand vacuum nozzle.
The charging base will recharge your
stick vacuum and also store the tools.
There are up to three spots to store
the tools on the charging base.
Reminder: The charging port on the
base is located underneath.
3. 4.
Grasp filter tabs Replace filter
and pull up to remove assembly in the Dirt
filter assembly and Tank, then snap the Dirt
empty dirt into waste Tank back into place on
container. the hand vacuum.