Page 1
CrossWave X7 using the 3-in-1 Docking Station & Clean out Cycle | Support The 3-in-1 Docking Station functions as a clean out tray, charging station, and storage tray for machine, brush rolls, and filter Clean Out Cycle: Plug in the docking station •...
Page 2
If machine stops in middle of cycle and orange dirt tank indicator starts blinking on digital display, remove and empty dirty water tank Clean out cycle button will be inactive until dirty ▪ water tank is emptied Place empty dirty water tank back on machine, ▪...
Page 3
Pull up on brush tab to remove brush roll • Place brush roll in drying tray to air dry Allow filter to dry for 24 hours after cleaning • Place filter in drying tray to air dry Take machine off docking station •...
Page 4
Wipe off any excess water on docking station Wipe off the charging prongs Return machine to docking station • Empty and clean dirty water tank before storing machine • For steps > Go to Dirty Water Tank Maintenance Charging:...
Page 5
Make sure charging cord is fully plugged into docking station • With adaptor unplugged and machine off docking station > Flip docking station over Remove charging cord from dock and reinstall, ensuring cord is fully plugged in Plug adaptor into wall outlet •...