Bissell CrossWave X7 Cleaning

Cleaning the dirty water tank/ support

Hide thumbs Also See for CrossWave X7:

Download this manual

CrossWave X7 Cleaning the dirty

water tank | Support

If orange dirty water tank indication light is illuminated, but the

dirty water tank is not full, follow these steps below:

Turn machine off

•

Remove dirty water tank by pressing down on button on top

•

of tank, grab front handle and pull tank out

Grasp top of tank from sides and pull up to remove tank lid

•

Need help?

Do you have a question about the CrossWave X7 and is the answer not in the manual?

Page 1 CrossWave X7 Cleaning the dirty water tank | Support If orange dirty water tank indication light is illuminated, but the dirty water tank is not full, follow these steps below: Turn machine off • Remove dirty water tank by pressing down on button on top •...
Page 2 Remove strainer from tank • Discard debris & rinse Pour dirty water tank into sink and rinse •...
Page 3 Remove filter from the tank lid •...
Page 5 Hand wash filter & screen with warm water, remove debris • Allow 24 hours for filter to fully dry before reassembling Rinse dirty water tank lid • Clean float sensors on the bottom and top of dirty water tank • lid with damp cloth or napkin Remove all visible debris and let completely dry before reassembling...
Page 6 Clean the gold sensors on the underbody of the machine • where the top of the dirty water tank connects Once all parts have dried - put filter back into dirty water tank • lid, strainer back into dirty water tank, and dirty water tank lid back onto the tank...
Page 7 Insert dirty water tank back into the machine inserting the • bottom of the tank first, pivot the top toward the machine until it clicks into place...
Page 8 If orange dirty water tank is full light continues to be • illuminated after the dirty water tank and sensors have been cleaned, please Contact Us...

2832f