Thermal Sensor - Lenovo ThinkCentre neo 50t Gen 3 Hardware Maintenance Manual

Removal steps

Thermal sensor

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 44.
2. Remove the front bezel. See "Front bezel" on page 44.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 47.
4. Disconnect the thermal sensor cable from the system board.
Removal steps
.
Chapter 5 Hardware removal and installation
59