Internal Speaker - Lenovo ThinkCentre neo 50t Gen 3 Hardware Maintenance Manual

Removal steps
Note: During installation, ensure that you connect the gray cable to the connector labeled AUX on the card,
and the black cable to the connector labeled MAIN.

Internal speaker

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 44.
2. Remove the front bezel. See "Front bezel" on page 44.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 47.
4. Disconnect the internal speaker cable from the system board.
58
ThinkCentre neo 50t Gen 3 Hardware Maintenance Manual