Front Wi-Fi antenna and cable
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 44.
2. Remove the front bezel. See "Front bezel" on page 44.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 47.
4. Disconnect the front Wi-Fi antenna cable from the Wi-Fi card. See "Wi-Fi card" on page 57.
Removal steps
Rear Wi-Fi antenna and cable
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the computer cover. See "Computer cover" on page 44.
2. Remove the front bezel. See "Front bezel" on page 44.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 47.
4. Disconnect the rear Wi-Fi antenna cable from the Wi-Fi card. See "Wi-Fi card" on page 57.
62
ThinkCentre neo 50t Gen 3 Hardware Maintenance Manual