Prior To Installation; Care And Maintenance - Kraus Sellette KPF-1680 Installation Manual

Single handle pull-down kitchen faucet

Hide thumbs Also See for Sellette KPF-1680:

Table of Contents

STOP

Prior to Installation:

Make sure you have all necessary parts by checking the diagram and parts list. If any

part is missing or damaged, please contact Kraus Customer Service at 800-775-0703

for a replacement.

Read all instructions and safety warnings and ensure you have all tools, parts, and

equipment necessary for a safe installation.

Turn off the hot and cold water supply at the angle stops and turn on the old faucet to

release any built up pressure. Remove existing faucet. Clean sink or countertop to

remove any debris, plumber's putty, or silicone.

Flush angle stops to release any debris prior to installation.

Pre-drilled hole size requirement: 1 3/8" (min) - 1 1/2" (max)

Max countertop thickness without deck plate: 2 1/4"

Max countertop thickness with deck plate: 1 3/4"

1, 2 or 3 hole installation

Care & Maintenance

To keep the product clean & shining, follow the steps below:

Rinse with clean water & dry with a soft cloth

Do not clean with soaps, acid, polish, abrasives or harsh cleaners

Do not use cloth with a coarse surface

Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

ACID

Table of Contents