Introduction - Presys T-500PIR Technical Manual

PRESYS
 Instruments

1.0 - Introduction

The Calibrator for Infrared Thermometer T-500PIR generates temperature values
in order to enable the calibration of infrared thermometers. The temperatures generated
have high accuracy, in an area of uniform temperature and emissivity.
This calibrator also has input for thermocouples and resistance thermometers, as
well as current meter function.
• The T-500PIR generates temperature from ambient to 500 ºC.
• Has input for thermocouples, RTDs and thermoswitches reading.
• The use of external standard thermometer is not required*.
• Carries out completely automatic calibrations with or without the use of a computer.
• Accuracy of up 0.4 ºC, stability of 0.2 °C and resolution of 0.01 ºC.
• Documenting capabilities: communication with computer and ISOPLAN Calibration
Software.
• Portable and compact, has strap for easy transport.
* For high performance calibration, it is possible to make use of an external sensor RTD
read in the input of the calibrator, with adjustment of the Callendar-Van Dusen
coefficients.
It has extensive programming capabilities, where the calibrator is programmed to
generate pre-set temperature.
Compatible with automatic calibration and documenting software, with application
of ISOPLAN software on PC / Windows platform, using the serial port for connection
between the PC and the calibrator that communicate via RS-232 or RS-485. ISOPLAN
software can register thermometers and factory instruments, generate work orders,
produce and print calibration certificates and reports, that is, all the information of power
is brought into the environment of calibrations.
T-500PIR
T-500PIR
Page 1