Table of Contents
Advertisement
PRESYS
Instruments
MEM: The T-500PIR calibrators allow many special programs and functions that
can be of frequent use. In situations like this, it would be useful to store the current
configuration in memory in order to save time. Up to 8 configurations can be stored in
memory.
Selecting the option MEM, it is possible to store the current configuration
(WRITE), restore a previous stored configuration (RECALL) or erase the 8
configurations from memory (CLEAR ALL).
Selecting the option WRITE or RECALL will present a new menu with numbers
1 to 8, representing each one of the memory positions. Choose one of the positions
and press ENTER. The writing operation (WRITE) can be made in an already used
memory position. The calibrator confirms the overwriting confirmation with the
message OVERWRITE MEMORY? The CLEAR ALL operation shows a confirming
message ARE YOU SURE? In both cases, press ENTER to confirm the operation or
C/CE to cancel.
2.3 - Manual Operating Mode
The display shows the selected temperature value of black body cavity and also
the current cavity temperature or thermo-element temperature value.
There are 4 ways in which the information are shown, covering the calibrator
input value (IN), the black body cavity temperature (PROB) and the temperature set
point (SET). The key
The black body temperature set point is selected directly by the keypad, even if
the message SET is not being displayed. The numeric keypad enables the SET
selection in any of the display presentation ways, to change the set point.
The set point value is increased by key
keys are kept pressed, the set point continues to be increased or decreased.
The key
T-500PIR calibrators.
WRITE
CLEARALL
interchanges the display presentation way:
IN = 23.456 mV
PROB= 225.01 ºC
PROB= 25.01 ºC
SET = 25.00 ºC
23.456
IN = Voltage (mV)
25.01
SET = 25.00 ºC
does not have function in the manual operating mode of the
RECALL
and decreased by key
T-500PIR
. While the
Page 11
Advertisement
Table of Contents
