Manual Operating Mode - Presys T-1200PIR Technical Manual

PRESYS
 Instruments
MEM: The T-1200PIR calibrators allow many special programs and functions : The T-1200PIR calibrators allow many special programs and functions : The T-1200PIR calibrators allow many special programs and functions
that can be of frequent use. In situations like this, it would be useful to store the current that can be of frequent use. In situations like this, it would be useful to store the current that can be of frequent use. In situations like this, it would be useful to store the current
configuration in memory in order to save time. Up to 8 configurations can be stored in configuration in memory in order to save time. Up to 8 configurations can be stored in configuration in memory in order to save time. Up to 8 configurations can be stored in
memory.
Selecting the option MEM, it is possible to store the current configuration
(WRITE), restore a previous stored configuration (RECALL) or erase the 8
configurations from memory (CLEAR ALL).
Selecting the option WRITE or RECALL will present a new menu with numbers
1 to 8, representing each one of the memory positions. Choose one of the positions 1 to 8, representing each one of the memory positions. Choose one of the positions 1 to 8, representing each one of the memory positions. Choose one of the positions
and press ENTER. The writing operation (WRITE) can be made in an already used
memory position. The calibrator confirms the overwriting confirmation with the memory position. The calibrator confirms the overwriting confirmation with the memory position. The calibrator confirms the overwriting confirmation with the
message OVERWRITE MEMORY? The CLEAR ALL operation shows a confirming
message ARE YOU SURE? In both cases, press ENTER to confirm the operation or
C/CE to cancel.

2.3 - Manual Operating Mode

2.3 - Manual Operating Mode 2.3 - Manual Operating Mode
The display shows the selected temperature value of black body cavity and also The display shows the selected temperature value of black body cavity and also The display shows the selected temperature value of black body cavity and also
the current cavity temperature or thermo-element temperature value. the current cavity temperature or thermo-element temperature value. the current cavity temperature or thermo-element temperature value.
There are 4 ways in which the information are shown, covering the calibrator There are 4 ways in which the information are shown, covering the calibrator There are 4 ways in which the information are shown, covering the calibrator
input value (IN), the black body cavity temperature (PROB) and the temperature set ), the black body cavity temperature (PROB ), the black body cavity temperature (
point (SET). The key
The black body temperature set point is selected directly by the keypad, even if The black body temperature set point is selected directly by the keypad, even if The black body temperature set point is selected directly by the keypad, even if
the message SET is not being displayed. The numeric keypad enables the SET the message the message SET SET is not being displayed. The numeric keypad enables the
selection in any of the display presentation ways, to change the set point. selection in any of the display presentation ways, to change the set point. selection in any of the display presentation ways, to change the set point.
The set point value is increased by key The set point value is increased by key The set point value is increased by key
keys are kept pressed, the set point continues to be increased or decreased. keys are kept pressed, the set point continues to be increased or decreased. keys are kept pressed, the set point continues to be increased or decreased.

The key
T-1200PIR calibrators.
Page 12
, it is possible to store the current configuration , it is possible to store the current configuration

WRITE
CLEARALL
In both cases, press ENTER In both cases, press

interchanges the display presentation way: interchanges the display presentation way: interchanges the display presentation way:
IN = 23.456 mV IN = 23.456 mV IN = 23.456 mV
PROB= PROB= 300.0 ºC PROB= 300. 300.0 ºC 0 ºC
PROB= 300.1 ºC PROB= PROB= 300 300.1 ºC .1 ºC
SET = 300.0 ºC SET = SET = 300 300.0 .0 ºC ºC
23.456 23.456 23.456
IN = Voltage (mV) IN = Voltage (mV) IN = Voltage (mV)
25.01 25.01 25.01
SET = 300.0 ºC SET = SET = 300 300
is not being displayed. The numeric keypad enables the
does not have function in the manual operating mode of the
RECALL
will present a new menu with numbers will present a new menu with numbers
WRITE) can be made in an already used WRITE ) can be made in an already used
CLEAR ALL CLEAR ALL operation shows a confirming operation shows a confirming
ENTER to confirm the operation or to confirm the operation or
PROB) and the temperature set ) and the temperature set

and decreased by key
T-1200PIR
) or erase the 8 ) or erase the 8

. While the