Table of Contents
Advertisement
Service Manual_2018-V2.0
Open the 2）slanted upward of hinge cover to a certain
angle by a screwdriver and remove the hinge cover.
Wear safety gloves for fear of cutting the hand.
The hinge cover install
1）When the door is closed, open the lower hinge cover
along the side wall to a suitable angle and push forwards
into the side wall of the hinge until the hinge cover boss
completely falls into the hinge hole.
2）Hold the side of upper hinge cover with both hands,
align the opening with the side wall of the hinge, and
push down until the hinge cover protrusion completely
falls into the hinge hole. Then the upper and lower hinge
covers are all in place.
Door light wire disassembly and assembly
1）
2）
19
Advertisement
Table of Contents
