Midea HS-185CN Service Manual page 23

8）Use Pipe cutter cut off the condenser tube❽, then
Shear off capillary ❾ by the capillary tube scissors.
9）Replace the compressorand welding the compressor
pipeline.-❿Welding the process pipeline.-⓫Welding the
low-pressure muffler.-⓬Welding the high-pressure
exhaust pipe.
10）Replace the filter, Cu-Fe tubes welding ⓭ used Ag
welding rod, Cu-Cu tubes welding ⓮ used Cu welding
rod.
11）Vacuum system,The degree of vacuum below 6Pa.
12）Perfusion refrigerant.
Service Manual_2018-V2.0
23