Table of Contents
Advertisement
Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the optical drive (see
6.
Remove the bottom cover (see
To remove the power button board:
1.
Disconnect the power button board cable from the system board(1).
2.
Disconnect the power connector cable from the system board(2).
3.
Remove the Phillips PM2.5×3.5 screw (3) that secures the power button board to the top cover.
46
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
28).
Optical drive on page
Bottom cover on page
29), if installed.
32).
Spare part number
813516-001
Advertisement
Table of Contents
