Table of Contents
Advertisement
Replacing the display cable
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Place the display cable and camera cable on the display back-cover and antenna assembly.
2. Route the display cable and camera cable through the routing guides on the display back-cover and antenna assembly.
3. Adhere the tape that secures the display cable to the display hinge.
Post-requisites
1. Replace the
display
hinges.
2. Replace the
display
panel.
3. Replace the camera.
4. Replace the
display
bezel.
5. Replace the
display
assembly.
6. Replace the fan.
7. Replace the
wireless
card.
8. Replace the
base
cover.
Display back-cover and antenna assembly
Removing the display back-cover and antenna assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
3. Remove the fan.
4. Remove the
display
assembly.
computer. After working inside your computer, follow the instructions in
computer. After working inside your computer, follow the instructions in
Removing and installing components
After
After
65
Advertisement
Table of Contents
