Table of Contents
Advertisement
Post-requisites
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
wireless
card.
4. Replace the
base
cover.
Display cable
Removing the display cable
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the fan.
3. Remove the
wireless
card.
4. Remove the
display
assembly.
5. Remove the
display
bezel.
6. Remove the camera.
7. Remove the
display
panel.
8. Remove the
display
hinges.
Procedure
1. Peel the tape that secures the display cable to the display hinge.
2. Remove the camera cable and the display cable from the routing guides on the display back-cover and antenna assembly.
3. Lift the camera cable and the display cable off the display back-cover and antenna assembly.
64
Removing and installing components
computer. After working inside your computer, follow the instructions in
After
Advertisement
Table of Contents
