Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Cognex DM 8072DL
Summary of Contents for Cognex DM 8072DL
- Page 1 ® DataMan 8072 DL Quick Reference Guide 2023 May 04 Revision: 23.2.0.2...
- Page 2 Precautions To reduce the risk of injury or equipment damage, observe the following precautions when you install the Cognex product: This product is intended for industrial use in automated manufacturing or similar applications. The safety of any system incorporating this product is the responsibility of the assembler of the system.
- Page 3 This product is intended for industrial use in automated manufacturing or similar applications. The safety of any system incorporating this product is the responsibility of the assembler of the system. This product does not contain user-serviceable parts. Do not make electrical or mechanical modifications to product components.
- Page 4 Symbols The following symbols indicate safety precautions and supplemental information: WARNING: This symbol indicates a hazard that could cause death, serious personal injury or electrical shock. CAUTION: This symbol indicates a hazard that could result in property damage. Note: This symbol indicates additional information about a subject. Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent.
-
Page 5: Product Overview
Product Overview DataMan 8072 DL Reader Illumination module LED aimers Illumination LEDs Trigger (press and hold to read) Lanyard hook Indicator light Communication module insertion point... -
Page 6: Base Station Overview
Base Station Overview Base station status indicators PAIR sticker - Reading the code pairs the base station with the device Connection point to the reader: pairing reader and base station non-wireless communication charging RS-232 Power plug (24V, max. 15W) - Page 7 Alternative power supply connector (24V, max. 15W, polarity marked on the plastic part near the connector). Recommended wire diameter is 14- 18 Ethernet...
- Page 8 DataMan 8072 DL Accessories Accessory Name Product ID Illustration Serial/USB slide-in DMCM-SERIALM-00 Ethernet slide-in DMCM-ENETM-00 Bluetooth slide-in DMCM-BTM-00 Charging base station DMA-CBASE-01 Intelligent Bluetooth base station DMA-IBASE-BT-02 Power Supply for base station DMA-24VPWR-xx Power Supply for reader DM100-PWR-000 DMA-HHBATTERY-01 Battery for the wireless reader DMA-MBC-xx* Multi-battery charger POE adapter...
- Page 9 Accessory Name Product ID Illustration Wall mount for base station DMA-IBASE-WALL-00 Cables Accesory Name Product ID Illustration Coiled RS-232 cable for reader, 2.5 m DM8000-RS232-02 Industrial RS-232 cable for reader, 2.5 m DM8000-RS232IND-02 Coiled RS-232 cable for reader, 4 m DM8000-RS232-05 Coiled USB cable, 2.5 m DM8500-USBC-02...
- Page 10 ** Collimated cable length including DM8000-ECABLE-X should not exceed 50 m. USB cable for base station: Use any standard USB-A to USB-B 2.0 cable up to 3 meters. Ethernet cable for base station: Use any standard CAT5/5e, SF/FTP or S/FTP cable. DMA-USB-00: Straight 10ft USB cable.
-
Page 11: Field Of View And Reading Distances
Field of View and Reading Distances Depth of Field values Note: All values beginning with 0 denote the minimum distance where the Field of View is able to see the entire code. DataMan 8072 DL with a 6.2 mm Lens (Standard Range, Focused to 75 mm) Device Distances in mm/1D min. - Page 12 DM8072 20-170 6 MIL 0-200 10 MIL 0-200 10 MIL 0-260 15 MIL 0-260 15 MIL 0-300 20 MIL...
-
Page 13: Connecting The Reader
Connecting the Reader Bluetooth Readers 1. Connect the slide-in to the reader and tighten the screws to lock the slide- 2. Insert the battery. 3. Insert the plug. Corded Readers 1. Connect the slide-in to the reader and tighten the screws to lock the slide- 2. -
Page 14: Installation
Cognex > DataMan Software vx.x.x > Documentation. Note: Cables are sold separately. If a standard component is missing or damaged, immediately contact your Cognex Authorized Service Provider (ASP) or Cognex Technical Support. CAUTION: All cable connectors are "keyed" to fit the connectors on the DataMan system;... - Page 15 DataMan 8072 DL Specifications Specification DataMan 8072 DL Reader Weight 254 g (without slide-in) Wireless: 530 g (18.70 oz) (battery included) Operating Temperature 0 ºC — 40 ºC (32 ºF — 104 ºF) Storage Temperature -10 ºC — 60 ºC (14 ºF — 140 ºF) Maximum Humidity <...
- Page 16 DataMan 8072 DL Imager Specifications Specification DataMan 8072 DL DL Imager Image Sensor 1/3 inch CMOS Image Sensor Properties 3.75 μm square pixels Image Resolution (Pixels) 1280 x 960 Lens Type 6.2 mm F:10 lens DataMan 8072 DL Base Station Specifications Specification DMA-IBASE-BT-02 Weight...
-
Page 17: Regulations And Conformity
Please read these guidelines carefully before using your device. Note: For the most current CE declaration and regulatory conformity information, see the Cognex support site: cognex.com/support. Regulator Specification FCC Part 15B, Class A... - Page 18 Safety and Regulatory This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take immediate measures. This equipment complies with the essential requirements of the EU Directive 2014/30/EU.
-
Page 19: For European Community Users
For European Community Users Cognex complies with Directive 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE). This product has required the extraction and use of natural resources for its production. - Page 20 Note: For the most current CE declaration and regulatory conformity information, see the Cognex support site: cognex.com/support. Please read these guidelines carefully before using your device. Safety and Regulatory...
- Page 21 Safety and Regulatory FCC Part 15, Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
- Page 22 中 国 大 陆 RoHS (Information for China RoHS Compliance) 根据 中国 大陆 《 电子信息 产品 污染 控制管 理办 法 》 ( 也称 为中 国大陆 RoHS)， 以 下部 份列 出了 本产 品中可 能包 含的 有 毒有 害物 质或 元素的 名称 和含 量 。 Table of toxic and hazardous substances/elements and their content, as required by China’s management methods for controlling pollution by electronic information products.
- Page 23 Copyright © 2021 Cognex Corporation. All Rights Reserved.
Need help?
Do you have a question about the DM 8072DL and is the answer not in the manual?
Questions and answers