How To Use - NOCO Genius BOOST X GBX75 User Manual & Warranty

lamp that emits a powerful beam at the highest setting. Cleaning. Power off the product before attempting any maintenance or cleaning. Clean and dry product
immediately if it comes in contact with liquid or any type of contaminant. Use a soft, lint-free (microfiber) cloth. Avoid getting moisture in openings. Explosive
Atmospheres. Obey all signs and instructions. Do not operate product in any area with a potentially explosive atmosphere, including fueling areas or areas which
contain chemicals or particles such as grain, dust or metal powders. High-Consequence Activities. This product is not intended for use where the failure of
the product could lead to injury, death or severe environmental damage. Radio Frequency Interference. Product is designed, tested, and manufactured to
comply with regulations governing radio frequency emissions. Such emissions from the product can negatively affect the operation of other electronic equipment,
causing them to malfunction. Model Number: GBX75 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.

How To Use

Step 1: Charge the GBX75.
The GBX75 comes partially charged out of the box and needs to be fully charged prior to use. Connect the GBX75
using the included USB-C Charge Cable or 12V Car Charger to the USB-C IN/OUT port. It can be recharged from any
powered USB port, like an AC adapter, car charger, laptop and more. The USB-C IN/OUT port utilizes Power Delivery
3.0 technology capable of receiving/delivering up to 60W. The time to recharge a GBX75 will differ based on the
discharge level and the power source used. Actual results may vary due to battery conditions.
When recharging, the charge level of the internal battery is indicated by the charge LEDs. The LEDs will slowly pulse
'on' and 'off' and become solid until all four charge LEDs are on. When the battery is fully charged, the green 100%
LED will be solid, and the 25%, 50% and 75% charge LEDs will turn «off». From time to time, the green 100% LED
will pulse indicating maintenance charging is occuring.
Fast Charge.
The GBX75 is equipped with fast charging technology that allows it to be recharged at a rate of up to 60W. A
compatible charger, capable of 60W USB-C Power Delivery 3.0, is required to fully utilize this feature. The fast
charge LED will illuminate when rate of charge exceeds 15W, indicating USB Power Delivery 3.0 is active.
Recharge Time: Charger Rating:
20h
5W
Internal Battery Level
Fast Charge.
Recharge Time: Charger Rating:
1.7h 60W